AudioControl ARCHITECT MODEL P2280 EQ
5.199,00 €
VAT included excl. Shipping Rate
The P2280 EQ 12-channel power amplifier has a digital (COAX) BUS input with DAC (32-96Khz, 16/24Bit), an analog BUS input and loop output as well as local analog inputs. Level controls on the back of the device optimally adjust the volume for each zone. The automatic signal detection, the master trigger or the zone trigger switch on the power amplifier. A front 5-band equalizer per zone allows the speaker properties to be adjusted to the room. An easily removable cover conceals the equalizer after adjustment.
Delivery time: 5-7 days
- Description
- Additional information
- Reviews (0)
- FAQs
Description
AudioControl ARCHITECT MODEL P2280 EQ – HIGH PERFORMANCE 12-CHANNEL, MULTI-ZONE AMPLIFIER WITH EQ
The P2280 EQ features a cool proprietary design including AudioControl's LightDriveâ„¢ anti-clipping protection, input bus capabilities, pass-through for outputs, 12V master trigger input/output, as well as local 12V trigger inputs in all zones, Signal detection and coax SPDIF inputs for digital sources. AudioControl's legendary equalizer controls are easily accessible from the panel and can be covered with the included magnetic security panel once the system is dialed in.
The Architect Model P2280 EQ's body is available in a durable black powder coat finish.
FEATURES
- 12 channels of high power and AudioControl performance
- Five-band, 16-channel speaker equalization
- 100 watts per channel into 8 ohms (all channels driven)
- 200 watts per channel into 4 ohms (all channels driven)
- Can be bridged as a 6-channel amplifier with 400 watts
- Low standby power consumption of less than 1 watt
- Compact design Fits in 2 racks
- LightDriveTM anti-clipping protection circuit
- 2 x input buses (digital and analog)
- Local zone entry trigger
- 12V trigger input and output
- Signal sampling on all channels
- Input busing and level controls
- Mono switch for improved bridging
- Sturdy rack mounting brackets included
- Five-year AudioControl guarantee
SPECIFICATIONS
INPUTS
- Inputs: 6 local stereo analog inputs, 1 stereo bus digital input, 1 stereo bus analog input
- Input Sensitivity: Variable 0-1Vrms
- Analog input sensitivity: 1 Vrms for full output; level to maximum
EXITS
- Amplifier channels: 12
- 1 stereo bus analog output
- Output power (8Ω): 100 W per channel
- Output power (4Ω): 200 W per channel
- Output power (bridged mono): 400W
- Minimum speaker load: 4Ω
PERFORMANCE
- Damping factor: >300
- Signal-to-noise ratio: >105 dB, (A-wtd, ref full output)
- Crosstalk: >80dB @ 1kHz
- Gain: 30dB
- Analog input sensitivity: 1 Vrms at full output, level at maximum
- DAC specifications: 32 – 96 kHz sample rate, 16/24 bit depth
EQUALIZER
- Mid: 75Hz, 250Hz, 700Hz, 2,5kHz, 12kHz
- Range: +/- 12dB
CONTROL
- Remote trigger: +12 VDC or potential-free contact, 2 x 1/8″ TS mono in/out
AC POWER REQUIREMENTS
- Standby: 0,9W
- Idle (main power on, all channels off): 52W
- All channels active: 87 W
- All channels 1/8 of the rated power: 265 W
- Full power (20A limited for households): 2400W
- Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable with reactive or unmatched loads
BTU/HR OUTPUT
- Standby: 3,1 BTU/hr
- Idle (main power on, all channels off): 178 BTU/hr
- All Channels Active: 270 BTU/hr
- All channels 1/8 of rated power: 361 BTU/hr
- Full power (20A limited for households): 2194 BTU/hr
WEIGHTS AND DIMENSIONS
- Dimensions: 19″ W (with rack ears) 17″ W (without rack ears) x 15,5″ D x 3,5″ H (2U)
- Weight: 21.0 lbs (9.1 kg)
IN THE BOX: Architect Model P2280 EQ, speaker terminals, remote control terminal, power cord, manual, warranty
Additional information
| Manufacturers | |
|---|---|
| Compaction | |
| Kanäle | |
| Color |
Be the first to review AudioControl ARCHITECT MODEL P2280 EQ
Customer questions and answers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews.