• 120 W per channel (8 ohms, 20 Hz-20 kHz, 0,08% THD, 2 channel operation, FTC), 250 W/Ch into 6 ohms, 1 kHz, 10%, 1 channel operation
• THX®-Certified Select for theater reference sound
• IMAX® Enhanced certified for IMAX® digital remasters
• Low impedance amplifier system with 4 ohm speaker drivers
• Massive custom transformer and custom 15.000 μF capacitors
• Copper bars connect capacitors and amplifiers
• Unphased amplifier circuit topology, audio quality components and separate digital/analog circuit boards
• Extruded anti-resonance aluminum heatsink
• Precision DAC supports 192kHz/24-bit multi-channel D/A conversion
• VLSC™ (Vector Linear Shaping Circuitry) Filter Technology (Front L/R)
• PLL (Phase-Locked Loop) jitter cleaning circuitry for SPDIF digital audio
• Bi-amp capability of front L/R speakers in 5.2/7.2/5.2.2 channel configuration
• Independent tone control (bass/treble) for all channels

• Isolated quad-core SoC board supports high-speed 802.11ac (2×2 MIMO) Wi-Fi®
• Amazon Music HD, Spotify®, TIDAL, TuneIn, Pandora®, and Deezer
• Works with Sonos and supports multiple Sonos Connect/Port controls and Volume Passthrough mode
• Works with Alexa and supports multi-room music
• Works with Hey Google and Chromecast built-in™
• AirPlay 2 multi-room audio with Siri voice control
• DTS Play-Fi® multi-room audio via the Integra Music Control app
• Compatible with the Integra Remote App for iPad®, iPhone® and Android™
• Roon Tested certified
• Roon Tested certified
• Hi-Res Audio over Network (DSD 11,2MHz/5,6MHz/2,8MHz, FLAC, WAV [RIFF], ALAC and AIFF up to 192kHz/24-bit)

• 7 HDMI inputs (1 front), Main Out (eARC), Sub/Zone 2 Out
• 2 digital audio inputs (rear, 1 optical, 1 gold-plated coaxial cable, assignable)
• 6 gold-plated analog audio inputs (rear, assignable)
• Gold-plated phono input and integrated equalizer (MM) for connecting turntables
• USB input (5 V/1 A) for audio playback (rear)
• 1/8˝ (3,5mm) Dirac Live/AccuEQ Advance setup microphone input (front)
• 2 gold-plated composite video inputs (rear, assignable)
• 1 gold-plated component video input (rear, assignable)
• 1/4˝ (6,3 mm) gold-plated headphone jack
• 11 gold-plated banana plug speaker terminals with clear controls (including Zone 2 and Zone 3)
• Dedicated gold-plated speaker outputs for Zone 2 and Zone 3
• Gold-plated 11.2-channel preamp outputs
• Gold-plated Zone 2 and Zone B pre-outs and Zone 3 pre-outs (analog RCA)
• Ethernet LAN port

• Ethernet supports setup and IP control via a web browser
• Works with Crestron®, Control4®, Savant, URC, ELAN, RTI and other major control systems
• Works with OvrC Pro and Domotz remote monitoring systems
• RS-232 input for external control and automation
• 2 IR inputs and 1 output
• 3 programmable 12V trigger outputs with adjustable delay (A: 100mA, B: 25mA, C: 25mA)
• Store for dealer settings and recall function
• AC connector for detachable IEC power cord
• Optional Rack Mount Kit (IRK-180-4C)

• Power Output Front L/R: 80 W/Ch into 8 ohms, 20 Hz-20 kHz, 0,08%, 2 channels driven, FTC, 170 W/Ch into 6 ohms, 1 kHz, 10%, 1 channel driven,
• Dynamic power: 160 W (3 ohms, front) 125 W (4 ohms, front) 85 W (8 ohms, front)
• Input Sensitivity and Impedance: 200mV rms/47k ohms (Line/Unbalance) 3,5mV rms/47k ohms (Phono MM)
• THD+N (Total Harmonic Distortion + Noise) : 0,08% (20Hz-20kHz, half power)
• Nominal RCA output level and impedance: 1 V rms/470 ohms (pre-out/subwoofer pre-out) 200 mV rms/470 k-ohms (Zone B line-out)
• Phono Overload: 70mV (MM, 1kHz, 0,5%)
• Frequency response: 10 Hz-100 kHz/+1 dB, -3 dB (direct mode)
• Tone control: ±10 dB, 20 Hz (bass) ±10 dB, 20 kHz (treble)
• Signal to noise ratio: 106 dB (IHF-A, line) 80 dB (IHF-A, phono)
• Speaker Impedance: 4ohm-16ohm

• Aluminum front panel and volume controls
• Switching from front to surround/height speakers in Stereo Assign mode
• OSD function displays A/V input signal data, output signal/setting data and network information
• Dolby® TrueHD and DTS-HD Master Audio® decoding
• Advanced Music Optimizer™ improves the quality of compressed audio playback
• THX® listening modes for movies, games and music
• Advanced Music Optimizer™ improves the quality of compressed audio playback
• High resolution GUI over HDMI
• Super resolution 1080p to 4K and 1080p/4K to 8K video upscaling via HDMI
• Crossover-Anpassung (40/45/50/55/60/70/80/90/100/110/120/130/150/180/200 Hz)
• A/V sync control (up to 500ms in 1ms steps at 48kHz)
• Sleep timer, HDMI passthrough and network standby
• 40 FM/AM/Internet radio presets with station names (10 characters)
• 3-level display dimmer (Normal/Dim/Dimmer)

Klipsch Optimize Mode allows you to seamlessly integrate your Klipsch Reference and Reference Premiere speakers with your Onkyo AV Receiver. Klipsch and Onkyo have teamed up to implement the exact crossover values ​​for the new Reference Premiere loudspeakers. Now you can simply select the speaker model you are using for each individual channel and the optimized crossover setting will be applied automatically.

State-of-the-art digital room correction technology improves overall audio performance across the entire frequency band without the need for an additional upgrade. Dirac Live automatically calibrates the sound in your room using either your smartphone and the included wired microphone, or virtually wirelessly using the Dirac Live PC or macOS* application and a third-party USB microphone (not included). Dirac Live unleashes the full potential of your speakers in any listening room, delivering a unique, pristine listening experience. Now you get a more accurate measurement of your surround sound system positions to be more precise, balanced and give a better result, with the delay time cap increased from 20 milliseconds to 50 milliseconds.

*The device must be connected to the internet and the same network as your AVR.

• Power supply: AC 120V~, 60Hz
• Leistungsaufnahme: 850 W
• Standby power consumption: 0.1 W
• Dimensions (W x H x D): 435 x 198 x 388,5 mm
• Weight: 14,0 kg
• Box dimensions (W x H x D): 560 x 320 x 462 mm
• Weight including packaging: 17,0 kg