Description

Stealth Acoustics LR6G

The Stealth Acoustics LR6G is a full range 2-way speaker system that is completely invisible once installed. The speaker features a rigid frame that attaches directly to standard structure. The paintable active cone surface is bonded to the speaker panel frame, creating an active surface surrounded by a stable mounting surface.

The Stealth Acoustics LR6G features an acoustically-coupled, high-performance 6,5" cone woofer and a direct-coupled 30mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow smooth frequency extension up to 20kHz. When the LR6G is installed in a standard insulated 2″ x 4″ frame and operating in a full 8 foot stud frame, frequency response below 45 Hz can be achieved. The LR6G features two independent protection circuits (high and low frequency range) that will automatically reset if the amplifier power is reduced too much.

The LR6G can be installed either in the wall or in the ceiling. On-site finishing options include latex paint, lightweight wallpaper, fabrics and select textured paints. No special parchments or other non-standard wall covering materials are required. Modern finishing methods such as Venetian plaster and selected veneers are supported by special techniques.

Recommended areas of application

• Distributed audio in the background
• Best suited for wall or ceiling installations

Specifications

Frequency Response:

45Hz to 20kHz

resilience:

100 Watt RMS

50 watts minimum recommended power

Protection:

Two independent self-resetting devices (low and high frequency)

Sensitivity:

83 dB (1 watt / 1 meter)

System Impedance:

8Ω nominal

Driver Components:

High frequency: 1″ (25 mm) neodymium motor

Low frequencies: 1,5″ (38 mm) voice coil, 6,5″ (165 mm) woofer

Ceramic magnet weighing 622 g (20 oz.)

Polar Scattering:

170 degrees vertically and horizontally

Dimensions:

Width: 15-7/8″ (403mm)

Height: 302mm (11-7/8″)

Mounting depth:

2-1/4″ (58mm)

Product weight:

3,9 kg (8,7 lbs.) each

Shipping weight:

9,5 kg (21 lbs.) per pair

5,9 kg (13 lbs.) per piece

Included accessories:

Washers

Tape

mounting screws

terminal wrench

Additional information

• Dimensions
• installation instructions