Description

Stealth Acoustics LRX83

The Stealth Acoustics LRX83 is a three-way full range speaker system that is completely invisible once installed. The speaker features a rigid frame that attaches directly to a standard structure. The paintable active cone surface is bonded to the speaker panel frame, creating an active surface surrounded by a stable mounting surface. Installation instructions are presented on a paper overlay that must be removed prior to installation. The overlay can also be used as a cutting template for retrofitting the speakers into an existing wall panel.

The Stealth Acoustics LRX83 can be built into both the wall and the ceiling. On-site finishing options include latex paint, lightweight wallpaper, fabrics and select textured paints. There is no need for non-standard wall covering materials. Advanced finishing methods such as B. veneer treatments can be supported by special techniques.

The Stealth Acoustics LRX83 features an acoustically-coupled 8" high-quality, low-profile, high-output woofer, a 30mm neo-magnet direct-coupled midrange driver and a 25mm neo-magnet direct-coupled tweeter. Advanced internal materials allow smooth frequency extension up to 20kHz. When the LRX83 is installed in the recommended backbox, frequency response below 40Hz can be achieved. The LRX83 has two independent protection circuits (high/mid range and low range) that automatically reset when excessive amplifier power is detected.

Recommended areas of application

• Multi Room Audio Systems
• music in the foreground
• Background music
• Voice announcements
• Home theater/surround sound
• Sound Masking Systems

Specifications

Frequency Response:

40Hz to 20kHz

Power Consumption:

160 Watt RMS
320 watts peak power
80 watts recommended minimum power

Protection:

Independent self-resetting devices (high/medium, low frequency stages)

Sensitivity:

83 dB (1 watt / 1 meter)

System Impedance:

8Ω nominal

Driver Components:

High frequency range: 1″ (25 mm) neodymium driver
Mid Frequency: 1,18″ (30mm) neodymium drivers
Bass: 38 mm (1,5″) voice coil, 203 mm (8″) ceramic magnet with 622 g (20 oz.) cone

Polar Scattering:

170 degrees vertically and horizontally

Dimensions:

Width: 15-7/8″ (403mm)

Height: 22″ (559mm)

Mounting depth:

2-1/2″ (58mm)

Product weight:

6,3 kg (14 lbs.) each

Shipping weight:

14,5 kg (32 lbs.) per pair

9,0 kg (20 lbs.) per piece

Included accessories:

Washers

mounting screws

terminal wrench

Additional information

• Dimensions
• installation instructions