Description

Stealth Acoustics LR3G

The Stealth Acoustics LR3G is a 3-way full range speaker system that is completely invisible once installed. The speaker features a rigid frame that attaches directly to standard structure. The paintable active cone surface is bonded to the speaker panel frame, creating an active surface surrounded by a stable mounting surface.

The Stealth Acoustics LR3G features an acoustically-coupled 8″ high-performance cone woofer with three directly-coupled 25mm neo-magnet tweeters. Advanced internal carbon fiber materials allow smooth frequency extension up to 20kHz. When installed in a standard insulated 3″ x 2″ frame and operating in a full 4 foot stud frame, the LR8G can achieve frequency response below 45 Hz. The LR3G features three independent protection circuits (low, mid and high) that automatically reset when excessive amplifier power is detected.

The LR3G can be installed in the wall as well as in the ceiling. On-site finishing options include latex paint, lightweight wallpaper, fabrics and select textured paints. No special parchments or other non-standard wall covering materials are required. Advanced finishing methods such as Venetian plaster and selected veneers are supported by special techniques.

Recommended areas of application

• Cinema Front Soundstage (LCR)
• Premium distributed audio and sound amplification
• Best suited for wall installations.

Specifications

Frequency Response:

45Hz to 20kHz

resilience:

200 Watt RMS

75 watts minimum recommended power

Protection:

Three independent self-resetting
Poly switches for bass, midrange and treble drivers

Sensitivity:

81 dB (1 watt / 1 meter)

System Impedance:

8Ω nominal

Driver Components:

High frequency: 1″ (25 mm) neodymium motor

Midrange: Two 1″ (25 mm) neodymium motors

Low Frequencies:

1,5″ (38 mm) voice coil,

8″ (203mm) woofer

622 oz. (20 g) ceramic magnet

Polar Scattering:

170 degrees vertically and horizontally

Dimensions:

Width: 15-7/8″ (403mm)

Height: 30″ (762mm)

Mounting depth:

2-1/2″ (64mm)

Product weight:

8,8 kg (19 lbs.) each

Shipping weight:

20 kg (44 lbs.) per pair

11,8 kg (26 lbs.) per single unit

Included accessories:

Washers

Tape

mounting screws

terminal wrench

Additional information

• Dimensions
• installation instructions