Parasound HINT 6 Halo Integrated Amplifier
Original price was: €6.350,00.5.099,00 €Current price is: €5.099,00.
VAT included excl. Shipping Rate
The new Parasound® HINT 6 is an advanced 2,1-channel integrated amplifier designed for the highest performance for serious two-channel music listening and easy integration into a surround sound system.
Delivery time: 3-5 days
- Description
- Additional information
- Reviews (1)
- Downloads
- FAQs
Description
Parasound HINT 6 Halo Integrated Amplifier
New Features (Changes from the original Halo Integrated)
- Burr Brown Analog Resistor Ladder Volume Control
- Dimmable volume indicator on the front panel
- An additional optical input (2 total)
- Updated USB receiver is plug and play with Windows 10 and MAC
- Ball-bearing, solid aluminum volume control
- Programmable default power-on volume setting
- Favorite memory with remote control button
- Increased phono stage gain for lower powered cartridges
- Improved left/right channel separation and balance tracking
- Updated look with subtle gold accents
Preamp and DAC features Parasound HINT 6
- ESS Saber32 Reference DAC (ES9018K2M)
- Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
- USB input decodes native DSD64, DSD128, DSD256 and DoP DSD
- Coax and optical inputs accept PCM up to 192kHz/24-bit
- Analog bass management with high and low pass crossovers
- Home theater bypass input for surround sound integration
- Front panel subwoofer level control
- Dedicated High Current Headphone Amplifier (TI TPA6120)
- Phono input for MM, MC and MI with 100 Ω or 47k Ω load
- Front panel aux input with +12dB automatic gain stage
- 5 pairs of RCA line level analog inputs
- 1 pair of balanced XLR analog inputs
- Balanced XLR and RCA outputs for left and right preamps
- 1 balanced XLR and 2 RCA subwoofer outputs
- Bass and treble controls with relay bypass via remote control or front panel
- IR in and IR loop out on the back
- 12 volt trigger output
- Backlit remote control with discrete buttons
- 0,5W standby power consumption in accordance with Energy Star and EU specifications
Features of the final stage
- 160 watts x 2 @ 8 ohms (RMS, both channels driven)
- 240 watts x 2 @ 4 ohms (RMS, both channels driven)
- The power amp circuit topology was designed by the legendary John Curl
- Direct amplifier input to bypass the preamp section
- Class A/AB operation with high bias
- Oversized shielded toroidal transformer
- Dual mono power supply and power amplifier
- 40.000uF filter capacity in the power supply
- Matched JFET input stages and MOSFET driver stages
- 12 high-voltage, high-current bipolar output transistors
- Heavy duty 24k gold plated 5 way speaker terminals
- Over temperature and short circuit protection relay
Output Power - (0,9% THD)
(Both channels driven, 20 Hz - 20 kHz)
180 watts x 2 @ 8Ω RMS
270 watts x 2 @ 4Ω RMS
Output Power - (0,05% THD)
(both channels driven, 20 Hz - 20 kHz)
160 watts x 2 @ 8Ω RMS
240 watts x 2 @ 4Ω RMS
Current carrying capacity
45 amps peak per channel
frequency response
10Hz - 100kHz, +0/-3dB
20Hz - 20kHz, +0/-0,5dB
Total Harmonic Distortion (THD)
< 0,01%, average hearing level
<0,05%, 160 watts x 2 @ 8Ω
Crosstalk between channels
> 70dB at 20kHz
> 78dB at 1kHz
Signal to Noise Ratio - IHF A-weighted
Line input: -103 dB (input shorted)
Digital input: - 106 dB
Amplifier damping factor
> 800 at 20Hz
Input sensitivity of the preamp stage
300mV in for 1V at the preamp output jacks
Total preamp stage gain: 10dB
Max. output unbalanced: 7 V
Max. Output Balanced: 9V
Sensitivity of the power amplifier stage
1V at Bypass/Amp In for 28V at Speaker Out
Total amplifier stage gain: 28 dB
Phono stage sensitivity / input impedance
MM: 41dB / 47kΩ
MC: 54dB / 47kΩ or 100Ω
Steepness of the high and low pass transitions
12 dB per octave
Supported DAC sample rates
USB: up to 384kHz / 32-bit PCM
DSD native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384kHz
Coax/Optical: up to 192kHz / 24-bit PCM
Digital/analog converter
ESS Saber32 reference ES9018K2M
384kHz / 32-bit
USB 2.0 control
Savitech SA9227, 384kHz / 32-bit
Headphone Amplifier
Texas Instruments TPA6120A
Output impedance 10 ohms
XLR pin marking
1 = ground (shield)
2 = positive
3 = negative (return)
input impedance
Unbalanced: 24kΩ
Balanced: 100k Ω per leg
Preamp Output Impedance
Unbalanced: 100Ω
Balanced: 470 Ω per leg
Dimensions
Width: 17-1/4" (437mm)
Depth: 413mm (16-1/4")
Depth, with cables: 437 mm (17-1/4")
Height, with feet: 150 mm (5-7/8")
Height, without feet: 5-1/4" (133 mm), 3U
net weight
33 lb. (15 kg)
Shipping weight
20,4 kg (45 lb.)
Power requirement
Standby: 0,5 watts
Idle power: 70 watts
Maximum: 750 watts
110-125VAC 60Hz or 220-250VAC 50Hz
AC line voltage is set on the rear panel
Additional information
| Manufacturers | |
|---|---|
| Compaction | |
| Color | Black silver |
1 review for Parasound HINT 6 Halo Integrated Amplifier
Add your rating
Customer questions and answers
There are no questions yet. Be the first to ask a question about this product.
Moritz -
Fantastic quality and sound performance. Very fast delivery and processing.
Verified purchase. More information