Parasound JC 5 stereo power amplifier
9.725,00 €
VAT included excl. Shipping Rate
The Parasound JC 5 is Parasound's flagship stereo power amplifier. It was uncompromisingly designed with the highest musical standards and maximum power reserves.
Delivery time: 3-5 days
- Description
- Additional information
- Reviews (0)
- Downloads
- FAQs
Description
Parasound JC 5 stereo power amplifier
- 400 watts x 2 @ 8 Ω RMS, both channels driven
- 600 watts x 2 @ 4 Ω RMS, both channels driven
- 1200 watts x 1 @ 8 Ω, in bridged mode
- The circuit was developed by the legendary John Curl
- Ultra high bias Class A/AB operation
- 12 watts per channel of pure Class A power
- 90 amps peak current per channel
- Stable with speaker impedance drops up to 1,5 Ω
- Balanced inputs with discrete circuits
- CHK Infinium, custom 5-way speaker terminals
- Neutrik locking XLR input connectors
- Vampire gold plated RCA input and loop out jacks
- Directly coupled signal path, no capacitors or inductors
- DC servo and relay protection circuits
- AC inrush protection with relay bypass
- Dual mono input stages with ±110 volt DC rails
- JFET input stage, MOSFET driver stage
- 24 beta-matched 15 amp, 60 MHz output bipolar transistors
- 1,7 kVA shielded toroidal transformer with independent windings for each channel
- Independent power supplies for the left and right channel input stages, the driver stages, and the output stages
- 8.880 µF Nichicon Gold Tune filter capacitors for the input stages
- 132.000 µF Rubycon filter capacitors for the output stages
- Full power down to 5 Hz for unrestricted deep bass
- Harris hyper-fast soft recovery bridge rectifiers
- Automatic switching on by 12 V trigger or audio sensors
- 4-rack case with carrying handles on the back
- Rack mounting hardware is included
Output power - both channels driven
400 watts x 2Ω
600 watts x 2Ω
Output Power - Bridged Mode
1200 watts x 1Ω
Bridged 4 Ω operation is not recommended.
The power measurement parameters are for 120 VAC:
0,05% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz)
Current carrying capacity
90 amps peak, per channel
slew rate
> 130 volts per microsecond
frequency response
5Hz - 100kHz, +0/-3dB
20Hz - 20kHz, +0/-0,25dB
Total Harmonic Distortion (THD)
< 0,05% at full power
< 0,03% at typical listening levels
IM distortion
<0.04%
TIM
Not measurable
Crosstalk between channels
> 87dB at 1kHz
> 72dB at 20kHz
input impedance
Unbalanced: 33kΩ
Balanced: 66kΩ, (33kΩ per leg)
overall gain
29 dB
Input sensitivity for 28,28V output into 8Ω
Unbalanced: 1V
Balanced: 1V per leg
S/N ratio
> 116 dB, input shorted, IHF A-weighted
> 111 dB, input shorted, unweighted
damping factor
1000 at 20Hz
DC trigger requirements
+9Vdc to +12Vdc, 5mA
Audio Trigger Requirements
2mV - 10mV
XLR pin marking
1 = ground (shield)
2 = positive
3 = negative (return)
Dimensions
Width: 17-5⁄8" (448mm)
Height without feet: 7-1⁄8" (181mm)
Height with feet: 7-3/4"" (197mm)
Depth: 20" (508mm)
Depth with cables: 546 mm (21-1⁄2")
net weight
73 lb. (33,1 kg)
Shipping weight
40,8 kg (90 lb.)
Power requirement
Standby: 1 watts
Idle (no music playing): 225 watts
Typical listening levels: 400 watts
Maximum: 1500 watts
Additional information
Manufacturers | |
---|---|
Compaction | |
Color | Black silver |
Kanäle |
Be the first to review "Parasound JC 5 Stereo Power Amplifier"
Customer questions and answers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews.